Automizer

The Automizer™ Right Hand

The Automizer™ Right-Hand side loader features a strong, light-weight body with a reliable loading arm that can reach farther than any other automated side loader.

Parked cars and other obstacles are no longer an obstacle with an arm that can reach 12-feet and lift up to 1,000 pounds fully extended.
Thanks to carefully engineered hydraulics, this arm maneuvers both smoothly and with exacting precision.

Labrie Automizer


Having a smooth operating arm is significantly important when maneuvering in tight spaces; our arm is the smoothest operating arm in the industry today due to its low "mass-in-motion" and "under hopper" inline design. This arm is easy to operate with an electric over hydraulic joystick control; and the Zero-Grab low swing out makes collection in narrow spaces a breeze!

  •  
    A

    Features

    QUALITY & PRODUCTIVITY, STANDARD ON EVERY AUTOMIZER 

     
    Automizer Features
     
  •  
    B

    Specifications

    Automizer™ Right-Hand 

     

     BODY DIMENSIONS

    20yd³ (20+0) 22yd³ (20+2) 24yd³ (20+4) 27yd³ (27+0) 29yd³ (27+2) 31yd³ (27+4) 33yd³ (27+6) 31yd³ (31+0) 33yd³ (31+2) 35yd³ (31+4) 37yd³ (31+6)
     Overall Width (in.) 96 96 96 96 96 96 96 96 96 96 96
     Overall Length, Tailgate Closed (in.) 232 239 254 272 279 294 309 303 310 325 340
     Overall Height Above Frame, Tailgate Closed (in.) 103 103 103 103 103 103 103 103 103 103 103
     Overall Height Above Frame, Tailgate Opened (in.) 192 192 192 192 192 192 192 192 192 192 192
     Overall Height Above Frame, Dumping Position (in.) 209 209 209 236 236 236 236 249 249 249 249

     BODY SPECIFICATIONS

     Body Floor 0.157 in. AR450 175,000psi
     Body Sides (lower) 10ga A1011 80,000psi
     Body Roof 12ga A1011 80,000psi
     Tailgate 12ga A1011 80,000psi

     HOPPER SPECIFICATIONS

     Hopper Size (cu.yd.) 6,5
     Hopper Floor 1/4 in. AR450 175,000psi
     Hopper Sides (lower) 1/4 in. AR450 175,000psi

     ARM SPECIFICATIONS

     Arm Lift Capacity 1,000 lbs
     Arm Reach 144 in.
     Arm Cycle Time 10 sec @ 0 in. reach; 20 sec @ 144 in. reach
     Arm Controls Proportional joystick, electric over hydraulic

     PACKER SPECIFICATIONS

     Packer Panel Cycle Time 12 sec @ 1200 rpm
     Packer Panel Face Plate 1/4 in. 100QT 100,000psi
     Packer Width 65 in.
     Packer Height 24 in.
     Packer Stroke 52 in.

     HYDRAULIC SPECIFICATIONS

     Pump Make & Model Dual Vane
     Pump Capacity BODY: 20 gpm@700 rpm; ARM: 16 gpm@700 rpm
     Max. Operating Pressure 3,000 psi
     Oil Reservoir (cab over) 85 gal

     CYLINDER SPECIFICATIONS

     Body Lifting Cylinder (20 cu.yd. bodies) 4 stages 6 in. bore x 150 in. stroke
     Body Lifting Cylinder (27 cu.yd. bodies) 4 stages 6 in. bore x 180 in. stroke
     Body Lifting Cylinder (31 cu.yd. bodies) 4 stages 6 in. bore x 204 in. stroke
     Packer Cylinders 4 in. bore x 2-1/2 in. rod x 40 in. stroke
     Tailgate Cylinders 2-1/2 in. bore x 1-3/4 in. rod x 39 in. stroke
     Arm Extension Cylinders 1-1/2 in. bore x 1 in. rod x 54 in. stroke
     Lifting Cylinder 3 in. bore x 1-1/2 in. rod x 16 in. stroke
     Grabber Cylinders 1-1/2 in. bore x 1 in. rod x 5 in. stroke
        Note: Specifications subject to changes without notice
       
  •  
    C

    A CLEANER WAY OF DOING BUSINESS

    CNG Ready since 2001

     
    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.

     

     

    THE BENEFITS OF CHOOSING CNG ARE HUGE:

    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck

    LABRIE CNG SIMPLE, RELIABLE AND PRODUCTIVE

    • Behind the cab design built to hold 4 or 5 CNG tanks, 66 or 81 DGE
    • Low height, integrated body shape, roof mounted design. 4 or 5 tanks, 60 to 75 DGE
    • Premium design having low impact on legal payload

     

    CNG Ready Trucks



     

     

     

     

     

  •  
    D

    Brochure & Media

    Automizer Right-Hand

     

    For more information on the Automizer Right Hand

     

     

    Adobe PDF Download our Product Brochure
    Youtube Visit our Youtube Channel
  •  
    E

    Dealers & Demos

    Call us for more info

     

    Dealers in the US

    Distributors in the US


    In Canada

    Distributors in Canada


    International

    International Distributor;

    General Sales & Demos

    Sales
    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos
       
     

Menu.

Home

Our Trucks

If Your Route Is

Our Certified Dealers

Parts & Service

About Labrie

Contact Us

Latest News

Find a Sales Rep

Click to find and contact one of our Sales Representatives.   Find a Sales Rep

Request a Quote

If you wish to request a quote to get pricing on a Labrie, Leach or Wittke truck, please use our Online Quote Request form   Request a Quote

Request Information

Thank you for your interest in Labrie Enviroquip Group Products. For more information, you may complete our Request Information Form.   Request information